色悠久久久久综合网

Blowing Molding Machine:

Blowing molding machine is a kind of equipment for making plastic granules into hollow containers through blow molding process. At present, the more common models include one-shot hollow extruding machine using PP and PE, and two moldings using PET, PC or PP. The injection stretch blow molding machine, as well as the newly developed multi-layer hollow extrusion blow and stretch blow molding. Blowing molding machines are mainly divided into three categories: extrusion blow molding machines, injection blow molding machines and special structure blowing machines.

At present, most blowing machines are still two-step blow molding machines, that is, plastic raw materials must be made into preforms before blowing. Nowadays, PET plastic material is generally used. Blow Molding Machine: After the liquid plastic is sprayed out, the wind blown by the machine is used to blow the plastic body into a cavity of a certain shape to make a product. Such a machine is called a blow molding machine. It is also a kind of blower, namely hydraulic blower.

Features of Blowing Molding Machine:

A. Stable performance with advanced PLC.

B. Conveying preforms automatically with conveyor.

C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

H. Strong clamping force with high pressure and double crank links to lock the mold.

I. Two ways of operating: automatic and manual.

J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

L. Contamination is avoided for the bottle body.

M. Ideal effect of the chilling with the chilling system.

N. Easy installation and starting

O. Low rejection rate: less than 0.3percent.

Configuration List of Blowing Molding Machine:

1. Control System

?	High response,?image high-quality control system,?specially support simple USB program upgrade,?providing?strong guarantee?for equipment upgrade, troubleshooting.
	Mitsubishi PLC,?generalized programming language,?program update,?convenient update,?free maintenance,?high precision,?fast response.

2. Pneumatic System

?	The servo motor use SMC cylinder. Low-pressure?control systems?match with FESTO and PARKER, respectively?assimilating and using the professional advantage of these top brands,?making the machine work more faster and improve response speed.
	High-pressure blowing control system all use FESTO, diameter is large, fast response speed.

3. Sensor System

	High quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.

4. Heating system

YCQ automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size. Each lamp’s horizontal position is adjustable to keep the machine flexible.

Cooling bottle neck avoid bottle neck deformation

5. Clamping System

	YCQ adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed. Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
6. Servo Motor	1. precision, speed and torque of the closed loop control;Overcome the problem of step motor. 2. rotational speed, high speed performance is good, generally rated speed can reach 2000 ~ 2000 RPM; 3. stability, low speed running smoothly, won’t produce similar to the stepper motor during low speed running step run phenomenon.Suitable for high speed response to the requirements of the occasion; 4. timeliness: motor deceleration dynamic response time is short, usually within a few milliseconds;
Reducer
	YCQ fully automatic pet bottle mchine. Bar distance and circuitous type pre-form carrier systems, energy saving 50﹪

6. Parts Picture

Pressure regulating table	Temperature control module	Circuit breaker
?	?	?
Amplifier module	Magnetic switch	Pneumatic finger
?	?	?
Electrical control box	Detection switch	Heating tube

7. Spare Part List (Free)

8. Optional Configuration (Additional Charge)

?	Function：If choosing this device, you only need to provide a network cable, then my company engineers can inspect the operation condition of machine at any corner of the world, with convenient maintenance and troubleshooting?,to provide timely technical support.
?	Function: Bottles can directly connect to filling machine in order after bottle blowing done

9. Auxiliary Machines

?	1,High pressure air compressor Air compressor system, tie-in use combination series high pressure gas system. Convenient?maintenance, easy inspection?and troubleshooting.
	2,Chiller Mainly used for cooling the mould and guarantee the bottle part not damaged in the heating process, to improve the quality of finished products and production efficiency.
?	3,Filter system Main function is?cool high pressure air to achieve a more ideal working temperature and increase the service life of pneumatic components and?filter the impurities?and oil?in the air, improving?product cleanliness.
?	4.Low pressure air compressor Used to provide air?to run machine.