色悠久久久久综合网

    <acronym id="wkeb9"><strong id="wkeb9"><address id="wkeb9"></address></strong></acronym>
    <td id="wkeb9"></td>
    <output id="wkeb9"></output>
      <p id="wkeb9"></p>
    1. <table id="wkeb9"><ruby id="wkeb9"></ruby></table>

      PRODUCT CATEGORY
      You are here: Home ? Filling Machine ? Blow Molding Machine ? 5L Bottle Blowing Machine
      5L Bottle Blowing Machine

      Bottle blowing machine is a kind of equipment for making plastic granules into hollow containers through blow molding process. At present, the more common models include one-shot hollow extruding machine using PP and PE, and two moldings using PET, PC or PP. The injection stretch blow molding machine, as well as the newly developed multi-layer hollow extrusion blow and stretch blow molding.

      Product Description

      5L Bottle Blowing Machine:

      5L Bottle Blowing Machine

      Bottle blowing machine is a kind of equipment for making plastic granules into hollow containers through blow molding process. At present, the more common models include one-shot hollow extruding machine using PP and PE, and two moldings using PET, PC or PP. The injection stretch blow molding machine, as well as the newly developed multi-layer hollow extrusion blow and stretch blow molding.The bottle blowing molding machine is convenient and quick, with a large amount of molding. After it appeared, it replaced most of the manual blowing bottles and was adopted by most beverage companies.

      Features of?Bottle Blowing Machine:

      A. Stable performance with advanced PLC.

      B. Conveying preforms automatically with conveyor.

      C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

      5L Bottle Blowing Machine

      D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

      E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

      F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

      G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

      H. Strong clamping force with high pressure and double crank links to lock the mold.

      5L Bottle Blowing Machine

      I. Two ways of operating: automatic and manual.

      J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

      K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

      L. Contamination is avoided for the bottle body.

      M. Ideal effect of the chilling with the chilling system.

      N. Easy installation and starting.

      O. Low rejection rate: less than 0.3percent.

      Bottle Blowing Molding Machine

      Configuration List of Bottle Blowing Machine

      1. Control System

      Blow Molding Machine High response,?image high-quality control system,?specially support simple USB program upgrade,?providing?strong guarantee?for equipment upgrade, troubleshooting.
      ?Blow Molding Machine Mitsubishi PLC,?generalized programming language,?program update,?convenient update,?free maintenance,?high precision,?fast response.

      2. Pneumatic System

      Blow Molding Machine The servo motor use SMC cylinder.
      Low-pressure?control systems?match with FESTO and PARKER, respectively?assimilating and using the professional advantage of these top brands,?making the machine work more faster and improve response speed.
      Blow Molding Machine High-pressure blowing control system all use FESTO, diameter is large, fast response speed.

      3. Sensor System

      Blow Molding Machine High quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.
      Blow Molding Machine

      4. Heating System

      Blowing Molding Machine YCQ automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size. Each lamp’s horizontal position is adjustable to keep the machine flexible.
      Blowing Molding Machine Cooling bottle neck avoid bottle neck deformation

      5. Clamping System

      Bottle Blow Machine YCQ adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed. Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
      Bottle Blow Machine
      Bottle Blow Machine
      Servo Motor
      1, precision, speed and torque of the closed loop control;Overcome the problem of step motor.
      2, rotational speed, high speed performance is good, generally rated speed can reach 2000 ~ 2000 RPM;
      3.stability, low speed running smoothly, won’t produce similar to the stepper motor during low speed running step run phenomenon.Suitable for high speed response to the requirements of the occasion;
      4.timeliness: motor deceleration dynamic response time is short, usually within a few milliseconds.
      Bottle Blow Machine
      Reducer
      Bottle Blow Machine YCQ fully automatic pet bottle mchine.
      Bar distance and circuitous type pre-form carrier systems, energy saving 50﹪.

      6. Parts Picture

      Blowing Machine Blowing Machine Blowing Machine
      Pressure regulating table Temperature control module Circuit breaker
      Blowing Machine Blowing Machine Blowing Machine
      Amplifier module Magnetic switch Pneumatic finger
      Blowing Machine Blowing Machine Blowing Machine
      Electrical control box Detection switch Heating tube

      7. Spare Part List (Free)

      Sequence number Name Quantity Remark
      1 Light tube 10 pcs
      2 0-rings(complete machine) 1set
      3 seal rings 10 pcs
      4 Monkey wrench 1 pcs
      5 cross wrench

      Straight Screwdriver

      Each for1 pcs
      6 High temperature wire, air tube Each for 5 meter
      7 Inner hex wrench(set) 1set
      8 Approach switch 2 pcs
      9 Switch 5 pcs

      8. Optional Configuration (Additional Charge)

      Blow Molding Machine Function:If choosing this device, you only need to provide a network cable, then my company engineers can inspect the operation condition of machine at any corner of the world, with convenient maintenance and troubleshooting?,to provide timely technical support.
      Blow Molding Machine Function: Bottles can directly connect to filling machine in order after bottle blowing done

      9. Auxiliary Machines

      Blow Molding Machine 1. High pressure air compressor
      Air compressor system, tie-in use combination series high pressure gas system. Convenient?maintenance, easy inspection?and troubleshooting.
      Blow Molding Machine 2. Chiller
      Mainly used for cooling the mould and guarantee the bottle part not damaged in the heating process, to improve the quality of finished products and production efficiency.
      Blow Molding Machine 3. Filter system
      Main function is?cool high pressure air to achieve a more ideal working temperature and increase the service life of pneumatic components and?filter the impurities?and oil?in the air, improving?product cleanliness.
      ?Blow Molding Machine 4. Low pressure air compressor
      Used to provide air?to run machine.
      Technical Parameter
      Item YCQ-5L-2E
      Bottle type specification Cavity 2
      Theory?output 1200-1300
      Max.volume 5L
      Bottle mouth maximum overall DIdiameter 150mm
      Bottle biggest diameter 180mm
      Bottle maximum height 400mm
      Power specifications Light tube quantity 32pcs
      Light tube power 1.5KW
      Maximum heating power 48KW
      All electric machine installation 51KW
      Actual consumption 35.7KW
      Air pressure specification Work pressure 7-9kg/cm2
      Low-pressure gas consumption 1600L/min
      Blow bottle pressure 25-35kg/cm2
      Higher -pressure gas consumption 3400Ltr/min
      Forzen water specification Work pressure 5-6?kg/cm2
      Temperature range 10℃
      Consumption 6000kcal/hr
      Forzen water flow 50L/min
      Machine specification Size of the machine 4.7×1.6×1.9
      Weight of the machine 3ton
      Video Show
      Similar Product
      Recommended Products
      Contact Us

      Leave a Reply

      Your email address will not be published. Required fields are marked *

      Suzhou City Chenyu Packing Machinery Co., Ltd.
      ADD : Yanhangtou,Sanxing,Jinfeng Town,Zhangjiagang City,Jiangsu,China
      TEL : +86-512-58532188
      FAX : +86-512-58532120
      MOBILE : 013962288333
      Web : www.tjdingwu.com
      E-mail :[email protected]
      Contact us
      ADD:Yanhangtou,Sanxing,Jinfeng Town,Zhangjiagang
      Tel:+86-0512-58532188
      Mobile:+86-13962288333
      QQ:2355348788
      Fax:+86-0512-58532188
      Email:[email protected]
      色悠久久久久综合网
        <acronym id="wkeb9"><strong id="wkeb9"><address id="wkeb9"></address></strong></acronym>
        <td id="wkeb9"></td>
        <output id="wkeb9"></output>
          <p id="wkeb9"></p>
        1. <table id="wkeb9"><ruby id="wkeb9"></ruby></table>